Absorbent 10

DESCRIPTION :

Absorbent 10 is a universally applicable, fine absorption material on the basis of calcinated minerals and without chemical additives for the absorption of acids, alkalis, solvents, paints and viscosities.

‍

CHARACTERISTICS :

• High absorbency or efficiency. Depending on the type and extent of soiling, a 10 kg bag of Absorbent 10 has an efficiency of 250 - 350 m².
• Low dust.

ADVANTAGES :

• Can be reused several times, thereby reducing the volume of waste;
• Walk-resistant (non-slip);
• Leaves no (dirt) residue;
• Can be used on all types of floors.

APPLICATION :

Sprinkle Absorbent 10 over the contamination. Then sweep back and forth with a hard broom so that the saturated granules are replaced by the granules that have not yet been in contact with the dirt. Then wait until the contamination is visibly absorbed. After this, you can proceed to scooping up and finally depositing the residue in the storage bin.

‍

NOTE:

You can easily check the degree of saturation of Absorbent 10: The darker the grain, the higher the degree of saturation.

‍

PRECAUTIONS :

It can be used on virtually all chemicals with the exception of peroxides and other strongly oxidizing substances.

‍