Product Overview
Cleaner PG is a highly concentrated cleaning agent with a high content of active ingredients. It has been specifically developed to remove animal and vegetable oils and fats in the food processing industry.
Key features:
- Safe and effective cleaning performance without the use of harsh, corrosive ingredients.
- Free of sodium hydroxide (NaOH) and potassium hydroxide (KOH), making it suitable for sensitive surfaces and equipment.
- It can be used safely on a wide variety of materials and surfaces.
- Suitable for use with foaming equipment for easy and efficient application.
- The foam application ensures that the product stays on vertical surfaces longer, which improves cleaning effectiveness.
- Improved penetration and removal of oils, greases, and contaminants through prolonged contact with the surface.
Highly concentrated formula
Biodegradable
Non-toxic
Other cleaners suitable for the food industry
- CIP Clean Soft is a highly alkaline cleaner developed for CIP systems, crate washers, and other applications in the food industry. It effectively removes fats, proteins, and starch, while delivering excellent cleaning performance on alkali-resistant surfaces at temperatures up to 95°C.
- Tank Cleaner X is a highly concentrated alkaline cleaner designed to remove mineral oil and grease residues in tank cleaning applications. The biodegradable formula can be applied using a variety of cleaning equipment and delivers excellent results, even at high dilution ratios.
ECONOMICAL USE: The highly concentrated formula ensures low consumption rates and cost-effective cleaning.
UNIVERSAL APPLICATION Suitable for use on a wide range of surfaces and materials.
APPROVED BY THE FOOD INDUSTRY NSF-registered and suitable for cleaning applications in food-processing environments.
NO IMPACT ON OIL/WATER SEPARATORS Does not interfere with the operation of oil and water separation systems.
Instructions for Use
Cleaner PG can be diluted between 1:100 and 1:50, depending on the type and degree of contamination, the application method, and the temperature.
Directions for Use
01. Dilute the product according to the level of contamination and application requirements.
02. Apply the diluted solution using low- or high-pressure equipment, a brush, or a foam lance.
03. Allow the product to react for a few minutes.
04. Rinse thoroughly with clean water, preferably under high pressure.
Features
| pH | 12,3 |
| Relative density at 20 degrees C | / |
| Flash point, degrees C | / |
| Solubility in water | Completely |
Precautions
Always consult the appropriate SDS before using the product.
Always wear appropriate eye protection and consult the safety data sheet before use.
We recommend testing the product on a small, inconspicuous area before applying it on a large scale.
Certifications
Cleaner PG is an NSF-registered cleaning product and can therefore be used in food-processing environments. The NSF registration certificate is available upon request.
